HS code 7210: Iron or non-alloy steel; flat-rolled products, width 600mm or more…
Iron or non-alloy steel; flat-rolled products, width 600mm or more, clad, plated or coated — heading 7210 of the Harmonized System (HS 2022).
Chapter 72: Iron and steel
Subheadings of 7210 (6 digits)
- Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with tin, thickness of 0.5mm or more
- Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with tin, thickness of less than 0.5mm
- Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with lead, including terne-plate
- Iron or non-alloy steel; flat-rolled, width 600mm or more, electrolytically plated or coated with zinc
- Iron or non-alloy steel; flat-rolled, width 600mm or more, corrugated, plated or coated with zinc (not electrolytically)
- Iron or non-alloy steel; flat-rolled, width 600mm or more, (not corrugated), plated or coated with zinc (not electrolytically)
- Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with chromium oxides or with chromium and chromium oxides
- Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with aluminium zinc-alloys
- Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with aluminium, other than plated or coated with aluminium zinc-alloys
- Iron or non-alloy steel; flat-rolled, width 600mm or more, painted, varnished or coated with plastics
- Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with materials n.e.c. in heading no. 7210
Pick the subheading that describes your product. A subheading marked “n.e.c.” (not elsewhere classified) or “other” covers only what the subheadings before it do not. Click a code to copy it.
Common products under 7210
Confirm the full code and the duty rate
The first 6 digits are the same in every country that uses HS 2022. Each country adds 2–4 more digits and sets the duty in its own tariff, and the section and chapter notes can include or exclude products, so check the destination’s official tariff before you put the code on the invoice.
Other headings in chapter 72
- 7201 Pig iron and spiegeleisen in pigs, blocks or other primary forms
- 7202 Ferro-alloys
- 7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps…
- 7204 Ferrous waste and scrap; remelting scrap ingots of iron or steel
- 7205 Granules and powders, of pig iron, spiegeleisen, iron or steel
- 7206 Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading no. 7203)
- 7207 Iron or non-alloy steel; semi-finished products thereof
- 7208 Iron or non-alloy steel; flat-rolled products of a width of 600mm or more, hot-rolled, not clad, plated or…
- 7209 Iron or non-alloy steel; flat-rolled products, width 600mm or more, cold-rolled (cold-reduced), not clad…
- 7211 Iron or non-alloy steel; flat-rolled products, width less than 600mm, not clad, plated or coated
- 7212 Iron or non-alloy steel; flat-rolled products, width less than 600mm, clad, plated or coated
- 7213 Iron or non-alloy steel; bars and rods, hot-rolled, in irregularly wound coils
- 7214 Iron or non-alloy steel; bars and rods, not further worked than forged, hot-rolled, hot drawn or…
- 7215 Iron or non-alloy steel; bars and rods, n.e.c. in chapter 72
- 7216 Iron or non-alloy steel, angles, shapes and sections
- 7217 Wire of iron or non-alloy steel
- 7218 Stainless steel in ingots or other primary forms; semi-finished products of stainless steel
- 7219 Stainless steel; flat-rolled products of width of 600mm or more
- 7220 Stainless steel; flat-rolled products of width less than 600mm
- 7221 Stainless steel bars and rods, hot-rolled, in irregularly wound coils
- 7222 Stainless steel bars and rods, angles, shapes and sections
- 7223 Stainless steel wire
- 7224 Alloy steel in ingots or other primary forms, semi-finished products of other alloy steel
- 7225 Alloy steel flat-rolled products, of a width 600mm or more
- 7226 Alloy steel flat-rolled products, of a width of less than 600mm
- 7227 Steel, alloy; bars and rods, hot-rolled, in irregularly wound coils
- 7228 Alloy steel bars, rods, shapes and sections; hollow drill bars and rods, of alloy or non-alloy steel
- 7229 Wire of other alloy steel
Source: HS 2022 nomenclature, 6-digit level (UN Comtrade). Descriptions are in English, as in the official nomenclature. Digits after the 6th differ by country.
Guides on this topic
Common questions
What is HS code 7210?
7210 is the HS 2022 heading for Iron or non-alloy steel; flat-rolled products, width 600mm or more, clad, plated or coated. It is in chapter 72 (Iron and steel), section XV, and has 11 six-digit subheadings, from 7210.11 to 7210.90.
Can I write 7210 on a commercial invoice?
Customs usually need at least the 6-digit subheading (for example 7210.11), and the import declaration uses the destination country’s full code of 8 to 10 digits. Use the subheading that matches your product, and confirm the national digits with the buyer, the customs broker or the official tariff.
More free tools
Triplicate is free and keeps getting better. Found it useful? Support Triplicate ♥
Prefer no ads? Pro removes all ads · $1/month